Heavy-Duty Die-Cast Aluminum Lemon Squeezer
Our best-selling citrus press: a thick-walled bowl that will not buckle under a full lemon and a lever ratio t…
Specifications →Lemon Squeezer Manufacturer — Die-Cast Citrus Presses & Clips
LeeYuen die-casts lemon squeezers, lime clips and commercial citrus presses in Jiangmen, the hardware cluster of southern China. Every bowl and lever is formed on our own presses, so wall thickness, hinge alignment and coating adhesion stay consistent batch after batch — the three things that decide whether a squeezer survives a season in a bar or a year in a home kitchen. We supply housewares importers, supermarket private-label programs and foodservice distributors across 30+ countries, with stock molds ready for private label and full ODM tooling from a sketch.
Die-cast hand presses with a deep bowl and a stainless pivot pin — the workhorse format for retail and foodservice citrus programs.
Food-Grade Citrus Press with Wide Stable Base
A wider footprint version for countertop service: the base spreads the load so the unit stays put while a serv…
Specifications →
Ergonomic Die-Cast Lemon Press
The value tier of our press family: same casting tool as the flagship, simplified handle, aimed at promotional…
Specifications →
Dual-Layer 2-in-1 Lemon Squeezer
Two bowls in one body: an inner strainer for pulp-free juice and an outer shell that doubles as a citrus holde…
Specifications →
Black Coated Hinged-Bowl Citrus Press
The all-black press that matches matte-black kitchen ranges: same thick-wall bowl as our flagship squeezer, fi…
Specifications →
Yellow Enamel Lemon Juicer (2-Piece)
A two-piece juicer set in gloss enamel yellow — reamer and clip press cover squeezed juice and garnish wedges,…
Specifications →
Cast Aluminum Multi-Fruit Squeezer
A wide-mouth press that takes lemon halves, limes and small oranges in the same tool — the one-press answer fo…
Specifications →Lightweight clip-style squeezers for bar service, buffets and gift retail — the lowest landed-cost way to enter a citrus program.
Aluminum Lemon Clip Squeezer
A clip that squeezes a wedge, not a half: the format bartenders reach for because it keeps the rind away from …
Specifications →
Bar-Tool Lime & Lemon Clip
The premium clip in the family: heavier casting, polished surfaces and a color sleeve that lets one tool carry…
Specifications →
Bird-Shape Lemon Slice Squeezer
A novelty shape that sells on sight: the bird beak presses a slice while the body catches the juice. Strong pe…
Specifications →
Yellow Enamel Lemon Clip Press
A clip-style press in bright enamel yellow: squeeze over the glass, rind stays outside, and the enamel surface…
Specifications →Stainless steel lever presses for juice bars, hotels and foodservice — built for shifts, not seasons.
304 Stainless Heavy-Duty Citrus Press
The step up from die-cast aluminum: a 304 stainless body that shrugs off commercial dishwashers and daily citr…
Specifications →
Commercial Manual Fruit Juicer (Counter-Top)
A counter-top lever press for juice bars: the long handle multiplies force so staff can press oranges and grap…
Specifications →
Stainless Lemon Clipper & Juicer Press
The clip format in full stainless: no coating to wear, so it is the safest spec for markets that scrutinize fo…
Specifications →
Black-Handle 304 Stainless Citrus Press
Stainless bowl and lever with a black grip that reads instantly as the 'bar' model — built for counters that j…
Specifications →
Long-Handle Stainless Bowl Press
A longer lever on the same stainless bowl casting: more torque per squeeze for grapefruit and thick-skinned or…
Specifications →
Mirror Stainless Bowl Squeezer
A fully polished stainless press with no coating to chip — the premium tier of our juicer line for kitchenware…
Specifications →Multi-blade tongs, wire slicers and presses that turn a lemon, tomato, boiled egg or pineapple into even slices in one motion — the prep-side companion to our juicer line, built on the same die-cast bodies and food-contact finish standards.
Round Fruit & Lemon Cutter Tongs
Squeeze the tong and a lemon, tomato or boiled egg drops through eight blades into even rounds — the garnish t…
Specifications →
Aluminum Lemon Slicer
A compact single-purpose lemon slicer for bar stations: consistent wheel thickness for dehydrator programs and…
Specifications →
Classic Wire-Frame Egg Slicer
The classic hinged wire slicer: an aluminum base and frame carry tensioned steel wires that cut boiled eggs, s…
Specifications →
2-in-1 Egg Slicer & Separator
A hinged slicer with a yolk-separator cup on the underside: slice on the frame, flip for separating — two prep…
Specifications →
Handheld Aluminum Egg Wedger
A hand-held wedger that cuts boiled eggs into six even sections in one press — the garnish-side tool for salad…
Specifications →
Stainless Pineapple Corer & Slicer
A pineapple corer that peels, cores and slices in one downward turn — a natural companion SKU to our fruit-sid…
Specifications →Category capabilities
- ✓ Die-cast aluminum, zinc alloy and 304 stainless options
- ✓ Stock molds ready for private label and market pilots
- ✓ Food-contact coatings tested to FDA 21 CFR 175.300 and LFGB §30/31
- ✓ Laser logo, color box, display carton and FBA-ready packing
Need a SKU that is not listed? We hold 100+ stock molds in this line — ask for the full PDF catalog at huge930608@gmail.com or WhatsApp +86 137 2340 4027.
Common buyer questions · Lemon Squeezers
How does a private-label lemon squeezer order work?
Pick a stock mold, send your logo artwork and target market, and we build the first article as a sales sample. Decoration, colour and packaging are quoted together so you see the full cost structure before committing to production.
Will the coating flake where the lemon acid touches it?
We specify food-grade coatings tested to FDA 21 CFR 175.300 and LFGB §30/31 for acid contact, and we tape-test adhesion on every production lot. Uncoated 304 stainless models are available for the most aggressive citrus programs.
Can you match the exact shape of a sample we already sell?
Yes — send the sample or a 3D file. We return DFM feedback in 2–3 days and cut tooling in 25–30 days. Tooling is quoted after DFM review, and mold ownership stays with you.